Installation; Ventilation Requirements - Motorola BMC9012 User Manual

Installation

Chapter 2
Installation
This chapter contains information necessary to help you successfully disconnect, move, and
reconnect the cable connections between the BMC9012 and the TV. It also describes how to
confirm proper installation of the unit.
You won't need any special tools to disconnect the BMC9012, although you may need a wrench
to loosen any tight connections. Make sure all coaxial connections are finger-tight secure, but not
so tight they cannot be undone with your fingers.
Warnings
!
Do not connect the BMC9012 unit to any switched power source.
!
Use only the specified BMC9012 power cord labeled "For use with BMC9012 Only."
!
Use the BMC9012 polarized power cord for the BMC9012 only.
!
Keep the BMC9012 on, unless moving or servicing the unit. If power is removed, or a power
outage occurs, it will take several minutes after power is restored for the unit to resume
normal operations.

Ventilation Requirements

Allow adequate ventilation and airflow around the BMC9000 to prevent overheating.
Warnings
!
Cabinet installations must have open airflow or no doors.
!
Vents must be unobstructed and open to ambient air.
!
Ensure top, side, and back clearance of at least two inches.
!
Keep away from other heat-generating devices.
4
Figure 1: BMC9000 Ventilation