Motorola BMC9012 User Manual

Broadband media center.
Hide thumbs
User Guide
BMC9012
Broadband
Media Center

   Also See for Motorola BMC9012

   Related Manuals for Motorola BMC9012

No related manuals

   Summary of Contents for Motorola BMC9012

  • Page 1

    User Guide BMC9012 Broadband Media Center...

  • Page 2

    Motorola, Inc. Motorola reserves the right to revise this publication and to make changes in content from time to time without obligation on the part of Motorola to provide notification of such revision or change. Motorola provides this guide without warranty of any kind, implied or expressed, including but not limited to, the implied warranties of merchantability and fitness for a particular purpose.

  • Page 3

    BMC9012 User Guide Graphical symbols and supplemental warning markings on bottom of terminal WARNING TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION TO PREVENT ELECTRICAL SHOCK, DO NOT USE THIS PLUG WITH AN EXTENSION CORD, RECEPTACLE, OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.

  • Page 4: Important Safeguards

    Safety & Regulatory Important Safeguards Read instructions All the safety and operating instructions should be read before the appliance is operated. Retain instructions The safety and operating instructions should be retained for future reference. Heed warnings All warnings on the appliance and in the operating instructions should be adhered to. Follow instructions All operating and use instructions should be followed.

  • Page 5

    Notwithstanding any information provided by Motorola in this manual regarding the use of batteries, the end user assumes all responsibility and liability to use and dispose of batteries in accordance with all applicable laws, rules and regulations. Motorola will not be liable to anyone for the end user's failure to use and/or dispose of batteries in the proper manner and in accordance with such laws, rules and regulations, or for any defect contained in batteries that may cause injury damage to persons or property.

  • Page 6: Declaration Of Conformity

    According to 47 CFR, Parts 2 and 15 for Class B Personal Computers and Peripherals; and/or CPU Boards and Power Supplies used with Class B Personal Computers, Motorola, Inc., 101 Tournament Drive, Horsham, PA 19044, declares under sole responsibility that the product identifies with 47 CFR Part 2 and 15 of the FCC Rules as a Class B digital device.

  • Page 7: Table Of Contents

    Table of Contents Introduction ......................2 BMC9012 Features ........................2 BMC9012 Diagrams........................3 BMC9012 Front View......................3 BMC9012 Back View ......................3 Installation......................4 Ventilation Requirements ......................4 Equipment Required ........................5 BMC9012 Connection Procedure ....................5 Digital video/digital audio ......................6 Digital video/composite audio ....................

  • Page 8: Introduction

    The Motorola Broadband Media Center (BMC) family of products delivers digital video and audio, and a whole new experience in interactive cable television to your home. Finding what you want to watch and watching it when you want has never been easier. The BMC9012 is simple to set up and easy to operate.

  • Page 9: Bmc9012 Diagrams

    BMC9012 User Guide BMC9012 Diagrams The following illustrations show the BMC9012 front and back views. Slight variations may exist for presentation purposes. BMC9012 Front View BMC9012 Back View...

  • Page 10: Installation

    Use the BMC9012 polarized power cord for the BMC9012 only. Keep the BMC9012 on, unless moving or servicing the unit. If power is removed, or a power outage occurs, it will take several minutes after power is restored for the unit to resume normal operations.

  • Page 11: Equipment Required

    1. To begin, make sure the TV and the BMC9012 are off and all connections are unplugged. 2. Position the BMC9012 in a well-ventilated open area near the TV and/or audio receiver.

  • Page 12: Digital Video/digital Audio

    Installation Digital video/digital audio 1. Connect one end of the DVI-D cable to the DVI-D port of the BMC9012 and the other end to the DVI-D In port of the TV or receiver. 2. Attach one end of the S/PDIF audio cable to the appropriate optical or coaxial S/PDIF port of the BMC9012 and attach the other end to the S/PDIF in port of the TV or receiver.

  • Page 13: Component Video/digital Audio

    2. Attach one end of the composite audio cables to the Left (L) and Right (R) audio outputs of the BMC9012 and the other end to the respective L and R inputs of the TV or receiver. 3. Follow the instructions under Hardware Installation Wrap-up, starting on page 9.

  • Page 14: S-video/composite Audio

    Installation S-video/composite audio 1. Connect one end of the S-Video cable to the S-Video port of the BMC9012 and the other end to the S-Video In port of the TV or receiver. 2. Attach one end of the composite audio cables to the Left (L) and Right (R) audio outputs of the BMC9012 and the other end to the respective L and R audio inputs of the TV or receiver.

  • Page 15: Basic Coaxial (rf) Video/audio

    Basic coaxial (RF) video/audio 1. Attach one end of the coaxial cable to the To TV port on the BMC9012 and the other end to the Cable/Antenna In port of the TV. This connection provides both audio and video signals.

  • Page 16: Audio Configuration

    Choose TV if your system uses a direct RF coaxial cable to connect directly to your TV The following table represents the audio format supported by each type of physical connection available on the BMC9012. Audio connections: supported formats Audio connection...

  • Page 17

    5. If you select a setting that is not supported, your screen may appear unreadable. Moxi reverts to your previous video output setting after 20 seconds if you don't confirm the new one. The following table lists the video resolutions supported by each type of physical connection available on the BMC9012: Video connections: supported resolutions Connection...

  • Page 18: Remote Control

    Remote Control The Moxi remote control allows you to access, control, and enjoy the many features of your BMC9012. You can also use this remote control as the primary remote control for many brands of TVs and audio devices. Instructions in this chapter show you how. Refer to the 1, 2 accompanying Viewer Guide for explanations of the buttons.

  • Page 19: Television Codes

    BMC9012 User Guide Programming by Search 1. Turn on the device you wish to program the remote for and ensure that the volume is audible. 2. On the Moxi remote, press and hold the MOXI and OK buttons simultaneously, until the LED light blinks twice.

  • Page 20

    0001 Midland 0047, 0017, 0051, 0039, 0032, 0135, 0747 Minutz 0021 Mitsubishi 0093, 0150, 0178, 0014, 0098, 0155, 0331, 0358, 0592 Motorola 0093, 0055 Multitech 0180, 0049, 0217 0030, 0056, 0036, 0170, 0434, 0455, 0156, 0178, 0166 0704 0092 Nesa...

  • Page 21

    BMC9012 User Guide TV Brand Manufacturer Code TV Brand Manufacturer Code Prism 0051 Proscan 0047, 0747 Proton 0178, 0003, 0031, 0052, 0466 Proxima 0734, 0735, 0737, 0742, 0743 Pulsar 0017 Quasar 0250, 0051, 0165, 0055, 0219, 0650 0047, 0018, 0029, 0038, 0090, 0135,...

  • Page 22: Audio/video Receiver Codes

    Remote Control Audio/Video Receiver Codes Receiver Brand Manufacturer Code Receiver Manufacturer Code Brand 3531 3375, 4157 Adcom 3002, 3304, 3319, 3616 Admiral 3182 Aiwa 4089, 4405, 3121, 3125, 3158, 3162, Akai 3076, 3115, 3151, 3224, 3450, 4255 3189, 3249, 3284, 3301, 3361, 3544, 3601, 3745, 4188, 4243, 4321, 4388, 4641 Alco...

  • Page 23

    BMC9012 User Guide Receiver Brand Manufacturer Code Receiver Manufacturer Code Brand Orient Power 3744 Outlaw Audio 4109 Panasonic 4518, 3039, 3309, 3367, 3389, 4288, Panor 3350 4316, 4763, 4764 Parasound 3549, 3895, 4124, 4238 Penney 3044, 3195, 3201, 3449 4089, 4189, 4269, 3189, 3391, 3620,...

  • Page 24

    Visit our website at: www.motorola.com 506820-001 3/04 MGBI...

Comments to this Manuals

Symbols: 0
Latest comments: