Kia 2014 Sportage Owner's Manual page 139

WARNING
• When programming
®
HomeLink Wireless Control
System, you may be operating
a garage door or gate opera-
tor. Make sure that people and
objects are out of the way of
the moving door or gate to
prevent potential harm or
damage.
• Do not use HomeLink® with
any garage door opener that
lacks the safety stop and
reverse feature as required by
federal safety standards. (This
includes any garage door
opener model manufactured
before April 1, 1982.) A garage
door opener which cannot
detect an object, signaling the
door to stop and reverse,
does not meet current federal
safety standards. Using a
garage door opener without
these features increases risk
of serious injury or death. For
more information, call 1-800-
355-3515 or on the internet at
www.homelink ®
.com.
Retain the original transmitter for
future programming procedures (i.e.,
new vehicle purchase). It is also sug-
the
gested that upon the sale of the vehi-
cle, the programmed HomeLink
tons be erased for security purposes
(follow step 1 in the "Programming"
portion of this text).
Programming
Your vehicle may require the ignition
switch to be turned to the ACC posi-
tion for programming and/or opera-
®
tion of HomeLink . It is also recom-
mended that a new battery be
replaced in the hand-held transmitter
of the device being programmed to
HomeLink ® for quicker training and
accurate transmission of the radio-
frequency.
Follow these steps to train your
HomeLink ® mirror:
Features of your vehicle
Flashing
® but-
1. When programming the buttons
for the first time, press and hold
the left and center buttons (
) simultaneously until the indicator
light begins to flash after approxi-
mately 20 seconds. (This proce-
dure erases the factory-set default
codes. Do not perform this step to
program additional
transmitters.)
OHD046306N
,
hand-held
4 47