Table of Contents
Advertisement
Helix Broadcaster 100 Touch Screen User Guide
RTMP Output
The output type
a Flash stream. You can use this output type to deliver the output to a Flash Media Server.
RTMP Output Screen
Target URI
In the
server. The URI specifies the RTMP protocol and the server's IP address. Typically it also
includes the
rtmp://183.43.12.21:1935/live
RTMP Name
For
target URI value. For example:
flashlive
Helix Media Server
The
You can use this method to make the stream available to popular media clients. You may also
want to use it to forward the stream to content distribution networks or to implement features
such as live stream archiving.
RTMP push with FLV envelope
Using the browser interface (see page 7), you can deliver the RTMP stream
Tip:
to the Akamai content distribution network.
field, use the virtual keyboard (see page 6) to specify the address of the target
Target URI
application name. For example:
live
The port value is not required as long as the destination server uses the
Tip:
default RTMP port of
, set the name of the stream delivered to the server. This name is appended to
RTMP Name
Flash stream variables (such as
Note:
supported in the stream name.
output type delivers the encoded stream to the embedded Helix Server.
Helix Media Server
uses the RTMP protocol to transmit the output as
to receive the Flash stream.
1935
to indicate the stream bit rate) are
%b
CHAPTER 3: Outputs
not
21
Advertisement
Table of Contents
