Http, Rtsp, And Rtmp Input - HELIX Broadcaster 100 User Manual

Helix broadcaster 100 touch screen user guide
Hide thumbs Also See for Broadcaster 100:
Table of Contents

Advertisement

Helix Broadcaster 100 Touch Screen User Guide
Input Interface
In the
the stream. Typically this is the
the secondary Ethernet port using the browser interface (see page 7), you can choose the
address or
Input Type (Unicast or Multicast)
For a UDP or RTP input, select
address where the stream is directed. If you choose
this field and use the virtual keyboard (see page 6) to enter the multicast address in the range
from
Buffer Size
The input buffer size sets the number of milliseconds of input data that is buffered before it is
encoded. The default value is
value of
Input Port
For a UDP or RTP stream, tap the
Broadcaster port that receives the remote server stream. If the stream is multicasted, select the
port on the multicast address where the stream is sent. The remote server that initiates the
stream must be configured to send the stream to this port.

HTTP, RTSP, and RTMP Input

If you choose
Broadcaster acquires the stream.
HTTP Input Setup Screen
drop-down, choose which Helix Broadcaster Ethernet connection receives
Input Interface
to monitor both the
All
Typically you do
Note:
is the loopback address (
originates on the Helix Broadcaster machine.
to
224.0.0.0
239.255.255.255
Receiving a multicast stream requires that Helix Broadcaster resides on a
Note:
multicast-enabled network.
or
.
200
100
For More Information:
Latency Encoding Values" on page 18.
,
, or
http
rtsp
rtmp
port, which is the main IP address. If you have configured
WAN
address and the
WAN
use the
not
Local Adapter
), which can be used only for a stream that
127.0.0.1
or
as the
Unicast
Multicast
Multicast
.
milliseconds. For low-latency encoding and delivery, set a
300
For details about low-latency encoding, refer to "Low-
field and use the virtual keyboard to set the Helix
Input Port
for
, you specify the network address where Helix
Input Protocol
CHAPTER 2: Inputs
address.
LAN
setting for network input. This
depending on the IP
Input Type
, the
field appears. Tap
Multicast IP
LAN
14

Advertisement

Table of Contents
loading

Table of Contents