Table of Contents
Advertisement
To prevent falling of the
speakers
Secure the speaker.
Using the tie down area on the rear of the speaker
and a cord (not supplied), secure the speaker to a
wall anchor (not supplied) permanently attached
to the wall.
1
Thread a cord to the speaker.
≥ Use a cord of less than ‰ 2.0 mm (
which is capable of supporting over 10 kg
(22 lbs).
A Cord (not supplied)
2
Thread a cord from the wall to the speaker
and tie tightly.
B Wall anchor (not supplied)
C Wall or pillar
D Approx.100 mm (4q)
16
VQT5J81
q),
3
/
32
Troubleshooting guide
Reference
Before requesting service, please perform the
following steps.
∫ Unit does not respond to remote
control or unit's buttons.
Disconnect AC power supply cord, wait 1 minute,
then reconnect AC power supply cord.
Do you have the latest firmware installed?
Panasonic is constantly improving the unit's
firmware to ensure that our customers are
enjoying the latest technology. (
Make the following checks and visit our
website for more information.
www.panasonic.com/support
Enter the model number.
Or visit our website to find a service center.
You can find a service center near you easily
on our website.
Other support information:
"Customer Services Directory (United States)"
(
19).
The following do not indicate a problem with
this unit:
– Regular disc rotating sounds.
– Image disturbance during search.
General operation
To return to the factory defaults.
Select "Restore" in "Default" in the Setup
menu. (
15)
To return all settings to the factory preset.
Reset the unit as follows:
1 Turn the unit on.
2 Press [<] to open the disc tray.
3 Press and hold [∫] and [1/;] on the main
unit at the same time for more than
5 seconds.
You have forgotten your ratings password.
You want to cancel the ratings level.
The ratings level returns to the factory defaults.
jRestore the default settings following the
steps described in "To return all settings to
the factory preset.". (
7)
4
4
above)
Hide quick links:
Advertisement
Table of Contents
