Sony DSC-F828 Service Manual page 19

DSC-F828
2-15.DD-204 BOARD
4 Two claws
3 LR-018 board (6P)
2-16.CF-097 BOARD
3 FP-756 flexible board
(51P)
Caution
Note: The power supply capacitor of the flash unit is charged to the high tension
voltage as high as 300 V at a maximum. You will get electrical shock when
you touch the terminal of the charged capacitor . The charged potential
remains even after the main power of the machine is turned off. Discharge
the remaining power in the capacitor referring to Service Note
(See page 1-1). High-voltage cautions. Short jig (R: 1k Ω /1W)
6 FP-748 board
5 Battery terminal board (3P)
Caution
DD-204 board
Fuse replacement caution label
6 CF-097 board
7 Remove soldering from two point
0 4
- 2
D D
8 Capacitor
4 Tape (A)
5 Ferrite bead
2 SY retainer
screws (M1.7 × 3)
1 Four
lock ace
2-12
9 DD-204 board
2 Two screws (M1.7 × 3)
lock ace
1 Fuse replacement caution label
Caution
Tape (A)
Ferrite bead
FP-749 flexible board