OPERATION
Working Mode Monitor
This monitor (5) displays the setting of the working mode.
The monitor display is as follows according to the operation of the
working mode switch.
P: P mode (for heavy-load operations)
E: E mode (for operations with emphasis on fuel consumption)
L: L mode (for fine control operations)
B: B mode (for breaker operations)
ATT: ATT mode (for crusher operations)
For details of the positions of the working mode switch, see
"CONTROLS AND GAUGES (PAGE 3-3)".
Travel Speed Monitor
This monitor (6) shows the setting for the travel speed.
The monitor display is as follows according to the operation of the
travel speed selector switch.
Lo: Low-speed travel
Hi: High-speed travel
For details of the positions of the travel speed selector switch,
see "CONTROLS AND GAUGES (PAGE 3-3)".
Air Conditioner Monitor
This monitor (7) displays the working status of the air conditioner.
Monitor lighted up: Air conditioner ON
Monitor off: Air conditioner OFF
Message Monitor
This monitor (8) lights up to inform the operator that a message has
been received from Komatsu.
To read the message, see "Message Display (PAGE 3-55)" for
details.
Lighted up green: There is unread message
Lighted up blue: There is message awaiting reply
OFF: There are no messages
DETAILED CONTROLS AND GAUGES
3 - 19