Table of Contents
Advertisement
2 Connector panel (lower section)
MVS-8000X
0 REMOTE 1 to 4 connectors
9 GPI 1and 2 connectors
8 - AC IN A, B, C, and D connectors
7 U terminal
MVS-7000X
0 REMOTE 1 to 4 connectors
9 GPI 1 and 2 connectors
8 - AC IN A, B, C, and D connectors
7 U terminal
a FM (frame memory) DEVICE 1 and 2 connectors
(USB2.0 compliant)
This connector is for attaching an external hard disk drive
for frame memory.
For details of hard disk drives that can be used with the
MVS-8000X/MVS-7000X system, consult your Sony
service representative.
b FM DATA (frame memory data) connector (RJ-45
compliant)
Connect to an Ethernet
This is a dedicated LAN connector for image data.
14
Location and Function of Parts
1)
switch.
1 FM DEVICE 1 and 2 connectors
2 FM DATA connector
3 REF IN connectors
4 NETWORK A (CTRL) connector
5 NETWORK B (DATA) connector
6 NETWORK C connector
1 FM DEVICE 1 and 2 connectors
2 FM DATA connector
3 REF IN connectors
4 NETWORK A (CTRL) connector
5 NETWORK B (DATA) connector
c REF IN (reference video input) connectors (BNC-
type)
If you wish to synchronize this unit to an external reference
signal, input the reference signal. For an HDTV system,
input an HD tri-level sync signal, black burst signal, or
analog sync signal. For an SDTV system, input a black
burst signal or analog sync signal.
The two connectors have a loop-through configuration.
Signal input to one connector can be output from the other
connector. If you will not be using the loop-through
output, be sure to terminate the unused connector with the
supplied 75Ω terminator.
Advertisement
Table of Contents
