JVC TH-SW8 Instructions Manual page 16

Connections
Before connecting the speaker cords;
Twist and pull the insulation coat off and remove.
Powered subwoofer
SP-PWSW8
4 m
Center speaker
SP-THS5C
Surround speakers
11
Front speakers
SP-THS5F
4 m
SP-THS7S
(Bottom)
Route the speaker cord
through the hole on the
bracket.
This page is for
Copper
Silver
Red
Black
Speaker cord (supplied)
• Connect the silver cords to the black (r) terminals.
• Connect the copper cords to the (q) terminals referring
to the table below:
FRONT SPEAKERS (LEFT)
FRONT SPEAKERS (RIGHT)
CENTER SPEAKER
SURROUND SPEAKERS (LEFT)
SURROUND SPEAKERS (RIGHT)
Wired connection
When you perform Smart
Surround Setup function
(A pg. 20), connect the
surround speakers to the
powered subwoofer, not to the
wireless receiver unit.
10 m
White
Red
Green
Blue
Gray
Wireless receiver unit
RX-THSW8