Check, Cancel And Change Programmes - JVC TH-R1 Instructions Manual

TIMER RECORDING

Check, Cancel And Change Programmes

PROG
CANCEL
SHOWVIEW/
VIDEO Plus+
1
Disengage the timer mode.
●
When lights up on the front display panel, press AUDIO
A.
● When j lights up on the front display panel, press TIMERj,
and press AUDIO A after j lights off.
When ASAT jB lights up on the front display panel, press
●
SATj.
2
Press PROG to access the Programme Check screen.
●
To return to the previous screen after you check the
programme, press PROG again.
To cancel the programme
●
Press selection keys to select a programme to be cancelled,
then press CANCEL.
3
Press selection keys to select a programme to be changed,
then press ENTER.
4
Change the settings of the desired recording options as
required.
● Refer to steps 4 - 10 in Manual Timer Programming.
5
Press PROG to exit the programme screen.
6
Set the unit to timer standby mode.
For VIDEO Plus+ or Manual Timer Programming
● Press TIMERj so that j lights up on the front display panel.
For On-Disc Timer Programming
Press AUDIO A so that
●
panel.
For Automatic Satellite Programme Recording
●
Press SATj for 2 or more seconds.
52
AUDIO A
TIMER j
1 2 3
4 5 6 AUDIO
TV
SAT
7 8 9
0
SAT j
Selection Keys
(FGDE)
VOL
ENTER
CLEAR (o)
lights up on the front display
When Programmes Overlap Each Other
If APROGRAMME OVERLAPPEDB appears, you have another
programme overlapping the programme you have just made. Press
PROG. Programme Check screen appears and conflicting
programmes will be highlighted in pink.
Example: Programme 3
(you have just made) and
Programme 4 overlap
each other.
1
Confirm the overlapping
programmes.
NOTES:
●
If you do not mind this overlap, press PROG to finish the timer
programme setting.
●
Recording is performed according to the order as displayed on
the Programme Check screen. The timer programme that follows
will not be performed correctly.
To cancel the programme
Press selection keys to select a programme to be cancelled, then
press CLEAR(o).
●
ATHE TIMER PROGRAMMING SETTING WAS CANCELLEDB
appears on the TV screen for about 5 seconds, then the normal
screen resumes.
To change the programme
Press selection keys to select a programme to be changed, then
press ENTER.
●
Change each setting as required.
2
Press ENTER to exit the Programme screen.
3
Press TIMERj to enter into timer standby mode.
NOTE:
When any overlaps remain after deletion and modification of
programmes, Programme Overlap list remains showing the
conflicting programmes. In such a case, repeat the procedure
above until the conflict is solved.
PROGRAMME CHECK
DATE START-STOP TV PROG DAILY/WEEKLY
05/07 SAT 18:10-20:00 L-1
06/01 THU 18:10-20:00 L-1
10/07 THU 19:00-20:00 7 WEEKLY
10/07 THU 19:45-20:30 7
++++++++++++++++++ NEW TIMER PROGRAMME ++++++++++++++++++
DISC TIMER PRGM
EXIT OK
SELECT WITH [CURSORS]
THEN PRESS [ENTER]
SELECT
PROG
VPS/PDC REC MODE
ON SP
ON SP
OFF XP
OFF LP