Table of Contents
Advertisement
Basic operations
Sleep Timer [SLEEP]
The system turns off automatically when the specified period of
time has passed.
Press SLEEP.
Each time you press the button, the shut-off time changes.
Example:
S L E E P 6 0 m i n
To check the remaining time
Press SLEEP once.
To change the remaining time
Press SLEEP repeatedly.
To cancel
Press SLEEP repeatedly until "SLEEP OFF" appears.
• Turning off the power also cancels the Sleep Timer.
Adjusting the output level
of the subwoofer and
center/surround speakers
[S.WFR, CENTER,
L-SURR.-R]
Press S.WFR +/– to adjust the subwoofer.
Press CENTER +/– to adjust the center
speaker.
Press SURR.-L +/– to adjust the surround
left speaker.
Press SURR.-R +/– to adjust the surround
right speaker.
NOTE
• You can also make adjustments by using the setup menu shown on the
TV screen. (See page 32.)
• The adjustments take effect for all sources.
• You cannot make this adjustment when FM or AM is selected as the
source.
Adjusting the treble
sound [TREBLE]
Press TREBLE +/–.
NOTE
• The adjustments take effect for all sources.
15
minutes
Changing the video signal
The system can be accommodated to your TV's video signal.
7 While DVD is selected as the source and before playback
1
Press and hold SCAN MODE for
2 seconds.
The current setting appears on the display window.
2
Press Cursor 3/2 to select the desired
mode.
• RGB:
Select when your TV accommodates the
interlaced RGB/composite video signal.
• Y/C:
Select when your TV accommodates the
interlaced S-video signal.
You can get better picture quality in the order —
"RGB" > "Y/C" > Composite.
3
Press ENTER while the selected mode
is shown on the display window.
NOTE
• Although the picture may be distorted when you press ENTER, this
is not a malfunction of the system.
• "RGB" is selected at your purchase.
See page 13 for button locations.
Hide quick links:
Advertisement
Table of Contents
