Rancilio epoca S Use And Maintenance Manual page 9

5. TRANSPORT
5.1 Packaging
The machine is delivered in a strong cardboard box
with internal protection.
The packaging bears symbols which must be
observed during handling and stocking of the item.
Always keep the package in a vertical position
during transport. Do not turn it over or lay it on
its side. Avoid bumping and exposure to
harmful atmospheric agents.
5.2. Inspection on receipt
Verify that the machine received corresponds to
the one indicated on the delivery receipt, including
any accessories.
Examine it for any damage during transport. If
damaged, inform the forwarder and our customer
service office immediately.
The packing elements(plastic bags, expanded
polystyrene, nails, cardboard, etc.) must not
be left within reach of children, as they are
potential sources of danger. Dispose of the
packing elements properly in accord with
local ordinances and regulations.
6. INSTALLATION
The machine is fitted with height adjustable rear feet.
The surface must be level, dry, smooth, strong, and
stable; and at a height of approximately 44" from the
floor.
It does not need to be anchored to the surface and it
does not require and technical operations to dampen
vibrations in order to operate properly.
It is recommended to leave enough free space
around the machine to facilitate its use and to
perform any necessary maintenance.
If the machine is wet or very damp, wait until it is
completely dry before installing or using it. Before
performing such work, the qualified service technician
should examine the unit for any possible damage to
the electrical components.
Reserve an area near the machine for the installation
of the coffee grinders and dosing machines(see
relevant instructions).
The machine is usually equipped with a water
softener, which must be connected by the user in
compliance with local laws. When installing the
softener, refer to its user manual for instructions.
A knock box or dreg drawer should be obtained
and conveniently placed for use.
6.1 Connections to be made by the user
Hook-up must be carried out by qualified
personnel in full accordance with federal,
state, and local regulations.
6.1.1 Water supply (Fig. 6)
Connections must be installed close to the machine.
· Water drainage pipe 1, having a minimun internal
diameter of 2", equipped with a water-trap
accessible for inspection.
· Water supply pipe 2, with a 3/8"G cut-off trap.
8