Contents Contents Introduction Silver 1 Silver 2 Silver 6 Silver 8 Silver 10 Silver Centre Silver FX Setting Up AV Positioning Optimum AV Speaker Positioning Silver FX Switch Configuration 2 Channel Positioning Setting up the Silver FX Fixing the Silver FX to a wall...
Platinum and Gold series speakers have been refined, and recent innovations in driver engineering incorporated across an extended new Silver series. While the Silver 1, 2, 6, centre and FX retain the form factor of their predecessors, the Silver 8 becomes a full three way design, and new to the Silver family, the Silver 10 offers an up-scaled floor-standing format, featuring twin 8”...
® RST cone technology in a classic two-way monitor configuration. High output and dynamic delivery make the Silver 1 an ideal choice for small to medium rooms in two-channel stereo or multi-channel cinema systems. Silver 2 The Silver 2 features a powerful 8”...
Setting Up AV Positioning The illustrations on the following pages show optimal positioning and some suggested room layouts for AV applications. For advice on configuring a 2 channel system, refer to page 7. The front, and in some cases rear, floor standing and stand mount speakers should be positioned approx 6 - 9 feet apart (1.8m - 2.5m) and start with them about 10 inches (25cm) from the wall.
2 Channel Positioning For use in a 2 channel system, the listening position and the loudspeakers should form an equilateral triangle. The speakers should be positioned approximately 6 - 10 feet (1.8 - 3m) apart. They ideally need to be between 8 - 18 inches (20 - 45cm) away from the rear and 3 feet (1m) from the side walls.
Fixing the Silver FX to a wall CAUTION: You will need to determine where the Silver FX’s will be fixed and the structure of the wall. For safety reasons, if you are unsure of your ability to provide a secure and safe fixing, do not attempt to fix these speakers to your wall, please obtain the services of a competent and qualified trades person.
Spiked Foot For Carpeted Floors Floor standing models only The Silver Series spiked foot incorporates a spike for use on carpeted floors and also, a soft polymer pad for use on wooden or tiled floors. Locking Please ensure there are no hidden wires under the carpet that could be damaged by the spikes.
Connecting Speaker Cables Bare Wire Connection Banana Plugs Unscrew the binding posts and pass Remove the red and black plastic plugs the bare wire through the through-hole from the terminals and insert the banana and tighten the binding post to clamp plugs into the holes that are revealed.
4 and 7). If room aesthetics or layout predetermine speaker positioning, or experiencing the presence of accentuated bass, please move on and read point 1 for the Silver 1 and 2 and point 2 for the Silver 6, 8 and 10.
MODEL Silver 1 Silver 2 Silver 6 Silver 8 Silver 10 Silver Centre Silver FX System Format 2 - way 2 - way 2 ½ way 3 - way 3 - way 2 way (M - T - M) 2 - way...
Page 14
. c o . u k Monitor Audio Ltd. 24 Brook Road Rayleigh, Essex SS6 7XJ England Tel: +44 (0)1268 740580 Fax: +44 (0)1268 740589 Email: info@monitoraudio.co.uk monitoraudio.com...