Page 3
The MASS Surround Sound system has been designed to deliver a great audible performance from gracefully refined, small cabinets that will complement any home. Loaded with Monitor Audio’s renowned speaker technology, elegantly packaged to create and deliver a truly immersive sound.
Connecting Speaker Cables To access the speaker terminals of the MASS Satellites first detach the back cover. This is a push-fit assembly and has fixing points in each corner. Unscrew each terminal, pass the bare wire through the exposed hole and re-tighten. Ensure to match the positive cable from the amplifier to the red terminal and negative cable to the black terminal.
Amplifier Connections & Controls 1. Power Mode Switch with 'On'-'Auto' Facility The Power Mode Switch has two positions: ‘On’–‘Auto’. With the switch in the ‘On’ position, the subwoofer is permanently switched on under all conditions and will need to be manually put into 'Standby' mode.
6. 12 Volt Trigger Input ~ Centre Pin = +12 Vdc For external power control from AV amplifier/ receiver to the subwoofer. Monitor Audio recommend using this function and a lead is supplied. This 12 V signal is generated by the AV amplifier/ receiver and tells the subwoofer to turn on from 'Standby' mode.
For the period of cover please refer to the product page on our website: monitoraudio.com for the product you have purchased. When purchasing Monitor Audio products, please keep your receipt of purchase safe, as this validates your warranty.
Page 10
Monitor Audio Ltd. 24 Brook Road Rayleigh, Essex SS6 7XJ England Tel: +44 (0)1268 740580 Fax: +44 (0)1268 740589 Email: info@monitoraudio.co.uk Web: monitoraudio.com Designed & Engineered in the United Kingdom Made In China Version 1. 2019...