Technical Specification - HK Audio DSM 2060 Manual

Digital speaker management system
Table of Contents

Advertisement

Available languages

Available languages

DSM 2060 Manual 1.0

10 Technical Specification

General
Inputs
Input Impedance
Maximum Input level
Outputs
Output Impedance
Maximum Output Level
Sample Rate
Bit Depth
Frequency Response
THD
Dynamic Range
Serial Comms Data
Processing
Gain
Output Ch. Source
HP filter frequency
LP filter frequency
LP / HP filter type
Delay
Limiter
EQ frequency
EQ gain
EQ width
Connectors
Audio inputs
Audio outputs
Serial comms
Network comms
Mains
Mains Power
Consumption
Dimensions.
Weight
2
> 10 kOhm Electronically balanced
+20 dBu
6
<100 Ohm, ground balanced
+22 dBu into 600 ohm load
96 kHz
24 bit
10 Hz to 40 kHz, +/- 3 dB (filters disabled)
20 Hz to 20 kHz, +/- 0.5 dB (filters disabled)
<0.01%, (+10 dBu, 20 Hz to 20 kHz, 30 kHz bandwidth)
>112 dB (A weighted, 22kHz bandwidth)
38.4 kbaud, format: 8 data, 1 stop, no parity
+20 dB to -80 dB and mute, 0.2 dB steps
Input A, Input B and Sum A+B
Off, 10 Hz to 25.4 kHz, 1/36 octave steps
10 Hz to 25.4 kHz and off, 1/36 octave steps
12, 18 & 24 dB/octave Bessel and Butterworth
12, 24 and 48 dB/octave Linkwitz Riley
4th or 8th order Hardman
Input 400 ms, output 80 ms
High performance limiter, adjustable threshold
in 0.2 dB steps, automatic time constants
10 Hz to 25 kHz, 1/36 octave steps
+15 dB to -15 dB, 0.2 dB steps
5.0 to 0.1 octaves bandwidth, 1/36 octave steps
3 pin female XLR
3 pin male XLR
Sub D
Future option
3 pin IEC
Universal switch-mode PSU, 85 v to 250 v AC, 50 / 60 Hz
< 25 watts
44 mm (H), 482 mm (W), 254 mm (D)
2.7 Kgs net
EC Declaration
of Conformity
We
Linea Research Limited
registered in
England, company No. 4742566
registered at
South Lodge House
Ickleton
Near Saffron Walden
CB10 1SH, England
Certify and declare under our
responsibility that the following product
DSM 2060 Digital Loudspeaker Proces-
sor
conforms with the following harmonized
European standards
• EN55103-1 Electromagnetic emissions
in environments E1, E2, E3, E4
• EN55103-2 Electromagnetic immunity
in environments E1, E2, E3, E4
• EN60065 Electrical product safety
and therefore complies with the
essential requirements and provisions
of EU directives
• 89/336/EEC Electromagnetic Compati-
bility directive, as amended
• 73/23/EEC Low Voltage Equipment di-
rective, amended by 93/68/EEC

Advertisement

Table of Contents
loading

Table of Contents