Page 19
START - UP CD/DVD-1 1-check all wires and components 2-Check screws and bolts 3-Connect the jumpers for 120 Volts 4-Turn the bias all the way to 0 volts 5-Connect the unit in bypass mode 6-Connect the unit with variable transformer...
FINAL TEST CD/DVD-1 1. Before final test unit was 4 days on burn-in-bench with music. 2. Take the unit from burn-in-bench to Q.C and play it immediately. Keep the line 120V A.C. 3. Check physically and check the components. -check all capacitor and devices direction. Capacitor stand up right way i.e. check co- solder.
Page 43
CD/DVD-1 DAC PCB OFFSET ADJUSTMENTS (B2A7XR07) With multimeter NEG probe at c117 GND on output PCB B2A2XR02 and positive probe at RCA left output jack. When offset is positive adjust-R618 on left channel When offset is negative adjust-R617 When offset is positive adjust-R-620 on right channel adjust-R-619 Offset should be less than 2mV Sample: offset at 6mV install between 200k-300k resistor.
Need help?
Do you have a question about the CD/DVD-1 and is the answer not in the manual?
Questions and answers