Zone Out; Monitor Out Assign; Zone Scene Rename; Hdmi Out2 Assign - Yamaha AVENTAGE RX-A1040 Owner's Manual

Mono
Switches between stereo and monaural for Zone2 output.
Settings
Off Produces stereo sounds in Zone2.
On Produces monaural sounds in Zone2.

Zone Scene Rename

Changes the scene names (for Zone2) displayed on the front display.
■
Procedure
1
Use the cursor keys to select a scene to be renamed and press ENTER.
2
Press ENTER to enter the name edit screen.
3
Use the cursor keys and ENTER to rename and select "ENTER" to confirm the
entry.
• To clear the entry, select "CLEAR".
4
Use the cursor keys to select "OK" and press ENTER.
• To restore the default setting, select "RESET".
5
To exit from the menu, press ON SCREEN.
Zone Rename
Changes the zone name (for Zone2) displayed on the front display or TV screen.
You can change the zone name in the same manner as "Zone Rename" in "Main
Zone Set" (p.121).
■

Monitor Out Assign

Select the zone for which the MONITOR OUT/ZONE OUT (COMPONENT VIDEO and
VIDEO) jacks are used.
Settings
Main, Zone2
• To watch videos played back on a video device on the Zone2 video monitor, you need to connect the video
monitor to the unit in the same way as the video device. For example, if you want to watch videos input from
the DVD player via a component video cable, connect the video monitor to the COMPONENT VIDEO jacks
with a component video cable.
■

HDMI OUT2 Assign

Select the zone for which the HDMI OUT 2 (ZONE OUT) jack is used.
Settings
Main, Zone2
• For details on video/audio signals that can be output to Zone2, see "Multi-zone output" (p.147).
■

Party Mode Set

Enables/disables switching to the party mode (p.91).
Choice
Target: Zone2
Settings
Disable Disables switching to the party mode.
Enables switching to the party mode. You can turn on/off the party
Enable
mode by pressing PARTY on the remote control.
CONFIGURATIONS ➤ Configuring various functions (Setup menu)
122
En