Table of Contents
Advertisement
11. Remove connectors from three points (for R, G and B) by loosening them. After removing all connectors, unscrew (two
points) to remove LCoS panel driving board.
For G
12. Unscrew (six points) and remove B701. Then, remove the engine shield.
13. Remove the optical engine from the engine holder. At that time, take care not to disassemble the engine holder (A320 and
A313). Otherwise, the position of optical engine and that of screen will not coincide with each other.
For R
For B
Engine shield
Screws
– 26 –
LCoS driving panel
Screws
B701
Screws
Advertisement
Table of Contents
