Geo KL-80 Operating Instructions

14. Transfer Possibilities
Axis transfer with the alignment line
Datum
Alignment line
1st plump
2nd plump
Axis transfer by bearing over the plump line
plump line
1. Set up laser over the axis. 2. Look over the plump line and align it to
the alignment rod. 3. Look over the plump line to the laser beam and
align the laser in the direction.
Height transfer
Measuring rod
Height point
Level device
- Rod reading B
+ 65 mm
+ 1/2
-----------------------
= pipe invert
15. Checking of Adjustment
Error-free: A - a = B - b
Fehlerfrei: A - a = B - b
1st build
16. Maintenance
The laser requires no special maintenance. Keep the electrical connections clean.
Do not clean with water spray. Clean glass parts with a soft, clean cloth. Store dry.
Always transport the laser in its original case.
17. Troubleshooting
1. No laser beam - check power supply. Low battery?
2. Low range - clean laser beam exit window.
3. Laser beam blinks slowly - move device into the levelling range by tilting forwards.
Aim point
4. Laser beam and direction limitation symbol blink slowly - reset laser from the
limitation.
5. Laser beam + banking arrows blink slowly - twist laser in direction of arrow until
the arrows are no longer seen.
If the errors of point 3, 4 and 5 are not corrected within 2.5 minutes, the device is
switched off automatically.
6. Laser switched off automatically (kick guard) - switch on the device again.
18. Technical Data
KL-80 laser class:. . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . .2, < 1 mW
KL-81 laser class: . . . . . . . . . .. . . .. . . . . . .. . . . . . . . . . . . . . . . . . . . . 3R, < 5 mW
Laser: . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . Diode, visible red, 635 nm
Beam diameter: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . at laser 13 mm
Range depending on ambient conditions: . . KL-80 up to 200/ KL-81 up to 500 m
Aim point
Inclination range: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 10 % to + 40 %
Self-levelling range: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 5 % to + 40 %
Reading accuracy: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.001 %
Permissible deviation: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ± 0.005 %
Direction setting range: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ± 5.000 %
Banking compensation: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ± 4°
Operating time: . . . . . internal 4.8 V DC NiCd rechargeable battery up to 28 hours
External power supply: . . . . . . . . . . . . . . . . 10.5 to 15 V DC with cable 0117.00
Undervoltage cut-out: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . yes
Watertight: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . to 0.35 bar
Temperature range: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 10° C to + 50 °C
Dimensions: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ø 130 mm, length 265 mm
Weight: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.2 kg
Range IR remote control: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . to 150 m from front
Guarantee: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 months
19. Accessories
Messlatte
Standard Delivery Package
Target frame
Target DN 150 - 300
1 leg set DN 150 (at device)
1 leg set DN 200/250/300
Battery charger
Rod reading A 20. Service
Our devices are covered by a 12-month guarantee. Unauthorized opening of the
devices invalidates the guarantee. Please always send the laser in for inspection or
Ø repair in its original case. Always specify the faults.
21. Disposal
The device must not be disposed together with the houshold rubbish
(electric scrap).
From:
2nd build
Solinger Strasse 8 • D-45481 Muelheim • Phone: 02 08/99 35 70 • Fax: 02 08 / 9 93 57 25
Edition 03/2008
to 18 m from behind
Comfort Version
IR remote control
1 leg set DN 400/500 each
Adapter for mounting with 3 legs
each Target DN 400/500
Subject to change

Operating Instructions

Automatic Pipe Laser
KL-80/-81
Congratulations on your new GEO Laser
In addition to information on how to use the laser, these operating
instructions also contain important safety instructions.
Read the operating instructions carefully before using the laser.
Contents
1. Safety Instructions 11. Flicker Mode
2. Description 12. Infrared Remote Control
2.1 LCD Display 13. Calculating the Percentage
14. Transfer Possibilities
3. Pipe Laying made easy
4. Set-up 15. Checking of Adjustment
5. Power Supply 16. Maintenance
6. Battery Charging 17. Troubleshooting
7. Buttons 18. Technical Data
8. Automatic Laser Cut-Out 19. Accessories
20. Service
9. Monitoring of Self-Levelling
21. Disposal
10. Banking Compensation