Table of Contents
Advertisement
● Explanation of graphic symbols used in this manual are
as follow.
Indicates an action that is not allowed.
Don't
Indicates that handling with wet hands is not
allowed.
No
wet hands
Indicates that disassembly is not allowed.
Not
disassembly
Indicates that use in a place where the product
is likely to get wet or allowing the product to get
wet is not allowed.
Not liquids
Indicates an action that must be done.
Do
Indicates that the power plug must be
disconnected from the power outlet.
Unplug
■ Precautions■common■to■the■main■unit■of■the■IS11LG,■
■
battery■pack,■charging■equipment,■au■IC-Card,■peripheral■
devices
Be■sure■to■read■the■following■hazards■
before■use.
Be sure to use only the exclusive peripheral devices.
Use of other peripheral devices might cause
overheating, fire, rupture, fault, or leakage of liquid.
Do
Do not use, store or leave the product in hot places
(e.g. by the fire, near a heater, under a kotatsu, in
direct sunlight, in a car in the hot sun). Doing so
Don't
might cause ignition, rupture, fault, fire or injury.
Before entering an area where flammable gas is
generated such as a gas station, be sure to turn off
the IS11LG and stop charging the battery. Failure to
Do
do so might cause the gas to catch fire.
Do not put the product in a microwave oven or a
pressure vessel. Doing so might cause ignition,
rupture, fault, fire or injury.
Don't
Do not throw the product into a fire or heat it. Doing
so might cause fire, rupture or fire.
Don't
Do not short-circuit the connection terminals. Do not
allow conductive foreign objects (metal fragments,
pencil leads, etc.) to come into contact with or get
Don't
inside the connection terminals. Doing so might
cause fire or a fault.
7
Advertisement
Table of Contents
