Sony TRINITRON KV-J21MF1AK Service Manual page 9

Adjusting the Adjusting the sound
picture and picture
SOUND ÷
0
MODE
+ or –
SELECT
PIC MODE
Selecting the sound mode
Press SOUND MODE until the mode you want
appears.
SOUND
MODE
Each time you press SOUND MODE, the screen
changes as follows:
Emphasize
Emphasize
Emphasize vocals and huge
low and high background audience Emphasize
music
sound effect atmosphere soft sound
MUSIC DRAMA SPORTS SOFT
Selecting the picture mode
Press PIC MODE until the mode you want
appears.
PIC MODE
Each time you press PIC MODE, the screen changes as
follows:
High contrast Normal
picture Soft picture picture
DYNAMIC SOFT STANDARD
Note
• If you change the picture and sound mode after the following
adjustments, the adjustment changes in accordance with the
picture and sound mode.
12 Operations
Adjusting the sound and picture settings
1
Press SELECT until the item you want to
adjust appears.
SELECT
Each time you press SELECT, the screen changes
as follows:
PICTURE COLOR BRIGHT
(Operative for
NTSC signal only)
SURROUND
HUE
BALANCE
TREBLE BASS SHARPNESS
2
Press + or – to adjust the item.
3
To adjust other items, repeat steps 1 and 2.
Notes
• You can also use SELECT and VOLUME +/– on the TV to
adjust the sound and picture settings.
• SURROUND is only applicable to a stereo signal. When
receiving a monaural signal, please turn off SURROUND for
the best sound.
Front of TV
R
COLOR SYSTEM SELECT TV SYSTEM
MANUAL PROGR AUTO PROGR
If the picture color is abnormal when receiving
programs through the ˘ (antenna) terminal
Change the "TV SYSTEM" (for KV-J21MF1AK/J21MN1AK/
J21MF3 only) or "COLOR SYSTEM" setting or adjust the "COLOR"
level in the on-screen display until the color becomes normal.
If the picture color is abnormal when receiving
programs through the video input jack
Change the "COLOR SYSTEM" setting or adjust the "COLOR"
level in the on-screen display until the color becomes normal.
Note
• Normally set "COLOR SYSTEM" to "AUTO".
If the sound is distorted or noisy when receiving
programs through the ˘ (antenna) terminal
Change the "TV SYSTEM" setting (for KV-J21MF1AK/
J21MN1AK/J21MF3 only) in the on-screen display until the
sound becomes clear.
Selecting a stereo or
bilingual program
p KV-J21MN1AK only
Press A/B/ENLARGE repeatedly until you
receive the sound you want.
The on-screen display changes corresponding to the
selected sound and the WAKE UP/STEREO indicator
also lights up.
A/B
ENLARGE
When receiving a NICAM program
On-screen display
Broadcasting
(Selected sound)
NICAM stereo NICAM MONO
z(Stereo sound)
z (Regular sound)
NICAM bilingual
NICAM
NICAM MONO
z MAIN z SUB z (Regular
(Main sound) (Sub sound) sound)
NICAM monaural
NICAM MONO
MAIN z (Regular sound)
z
(Main sound)
When receiving an A2 (German) program
On-screen display
Broadcasting
(Selected sound)
A2 (German)
STEREO
(Stereo sound)
stereo
A2 (German)
z MAIN z SUB
bilingual (Main sound) (Sub sound)
Notes
• If the signal is very weak, the sound becomes monaural
automatically.
• If the stereo sound is noisy when receiving a NICAM program,
select "MONO". The sound becomes monaural, however, the
noise will be reduced.
If the sound is distorted or noisy when
˘
receiving a monaural program through the
(antenna) terminal
Press A/B/ENLARGE repeatedly until "MONO"
appears on the screen.
z MONO z AUTO
To cancel the monaural sound setting, press
A/B/ENLARGE again until "AUTO" appears on the
screen.
Notes
• The "MONO" or "AUTO" setting is memorized for each
program position.
• You cannot receive stereo signal when the TV is in the
"MONO" setting.
13
Operations