Sony TRINITRON KV-J21MF1AK Service Manual page 6

Presetting channels
You can preset up to 100 TV channels in numerical
sequence from program position 1 automatically.
To change the channel for a particular program
position or to receive a channel with a weak signal,
you can preset the channel manually. You can also
disable program position.
You can preset TV channels using the buttons on the
TV or the remote commander.
Presetting channels automatically
using the buttons on the TV
3
2 1
Front of TV
POWER
R
COLOR SYSTEM SELECT TV SYSTEM
MANUAL PROGR AUTO PROGR
1
Press POWER to turn on the TV.
POWER
When the TV is turned on in standby mode, press
POWER on the remote commander.
2
Press TV SYSTEM until your local TV system
appears (KV-J21MF1AK/J21MN1AK/J21MF3 only)
B/G I D/K M
TV SYSTEM
3
Press AUTO PROGR.
1 2 3
AUTO PROGR
To start presetting channels automatically
from the specified program position
1 Press MANUAL PROGR.
2
Press TV SYSTEM to select your local TV system
(KV-J21MF1AK/J21MN1AK/J21MF3 only).
3 Press PROGR +/– to select the program position.
4 Press AUTO PROGR.
6
Getting Started
Presetting channels manually using the
buttons on the TV
1
Press MANUAL PROGR.
2
Press PROGR +/– on the remote commander
until the required program position
appears on the screen.
3
Press TV SYSTEM until your local TV system
appears (KV-J21MF1AK/J21MN1AK/J21MF3
only).
4
Press VOLUME +/– until the required channel
picture appears on the screen.
5
Press MANUAL PROGR.
If the TV system is not properly selected
(KV-J21MF1AK/J21MN1AK/J21MF3 only)
The color of the picture may be poor and/or the sound
may be noisy. In this case, select the appropriate TV
system.
1 Press PROGR +/– on the remote commander to
select the program position.
2 Press TV SYSTEM until the picture and sound
become normal.
Notes (KV-J21MF1AK/J21MN1AK/J21MF3 only)
• If you do not know your local TV system, consult your nearest
authorized service center or dealer.
• The setting of the TV SYSTEM is memorized for each program
position.
Disabling program positions using the
buttons on the TV
By disabling unused or unwanted program positions,
you can skip those positions when you press
PROGR +/– on the remote commander.
1
Press PROGR +/– on the remote commander
until the unused or unwanted program
position appears on the screen.
2
1
Press MANUAL PROGR.
3
Press PIC MODE on the remote commander.
4
Press MANUAL PROGR.
To cancel the skip setting
Preset the channel manually or automatically again.
Presetting channels automatically
using the remote commander
+ or –
SELECT
1
Press POWER to turn on the TV.
POWER
When the TV is turned on in standby mode, press
POWER on the remote commander.
2
Press SELECT until "TV SYSTEM" appears
(KV-J21MF1AK/J21MN1AK/J21MF3 only).
SELECT
TV SYSTEM : B/G
3
Press + or – to select your local TV system
(KV-J21MF1AK/J21MN1AK/J21MF3 only).
B/G I D/K M
4
Press SELECT until "AUTO PROGRAM"
appears.
SELECT
AUTO PROGRAM
5
Press + or – .
VHF LOW B/G
6
Press + or – .
1 2 3 1
Presetting channels manually using the
remote commander
1
Press SELECT until "TV SYSTEM" appears
(KV-J21MF1AK/J21MN1AK/J21MF3 only).
SELECT
TV SYSTEM : B/G
2
Press + or – to select your local TV system
(KV-J21MF1AK/J21MN1AK/J21MF3 only).
B/G I D/K M
3
Press PROGR +/– or a number button until
the required program appears on the
screen.
PROGR
1 3
2
4 5 6
or
7 8 9
÷
0
JUMP
4
Press SELECT until "MANUAL PROGRAM"
appears.
SELECT
MANUAL PROGRAM
5
Press + or – .
VHF LOW B/G
6
Press + or – .
1
The selected channel appears on the screen.
7
Press SELECT to return to normal screen.
SELECT
7
Getting Started