Table of Contents
Advertisement
10.4. Cleaning the outside of the grinder
To clean the exterior of the grinder, first wipe with a dry soft cloth, and then gently
wipe with a damp soapy cloth.
11. MAINTENANCE
11.1. General warning
Before performing any type of maintenance you should:
• Always turn OFF the main power switch to the off position (
• If the grinder is jammed, unplug it from the power source and contact an
authorized service technician.
Not following these warnings can compromise the safety of the grinder as well as
the user.
11.2. General maintenance of the grind chamber
To guarantee the efficiency and correct operation of the grinder, it is essential to
follow manufacturer instructions and ensure that all maintenance work is carried
out by qualified staff.
Dull burrs will result in; a lower quality grind, greater heat generation in the coffee
and grinder, increased electrical consumption, and finally it puts additional stress on
the grinder motor.
NOTE: Based on extensive experience and a medium-hard coffee blend, we
recommend replacing the burrs after grinding 350 Kg/770 lb of coffee.
K3 TOUCH, K3 PUSH, K3 TOUCH ADVANCED
16
ORIGINAL INSTRUCTIONS | Ref. quality process 002/03 | v. 22/09/2014 | K01070
,
and
).
Burr change
350 Kg
Advertisement
Table of Contents
