Ac Adaptor - Toshiba Satellite A665 User Manual

Installing and Replacing the battery
1. Open the battery cover on the back side of the remote controller.
2. Slide the battery out of battery case.
3. Insert the battery in place. Be sure to place the battery with correct
polarities. Push it forward to fit into the battery case.
4. Close the battery cover securely.

AC adaptor

The AC adaptor can automatically adjust to any voltage ranging from
100 to 240 volts and to a frequency of either 50 or 60 hertz, enabling you to
use this computer in almost all country/region. The adaptor converts AC
power to DC power and reduces the voltage supplied to this computer.
To recharge the battery, simply connect the AC adaptor to a power source
and to the computer. Please refer to Chapter 6,
Modes, for further information.
User's Manual
MCE IR Remote Control
Model: G83C000BF116
1x 3V CR2032 Lithium battery
Figure 2-12 Installing/Removing the battery
Figure 2-13 The AC adaptor (2-pin plug)
RC6
ir
Made in China
Power and Power-Up
Satellite A660/A665
2-19