Product Safety; Electromagnetic Compatibility (Emc); Manufacturer’S Declaration Of Conformance; Unpacking - Pyramid Ac receiver Installation Manual

Table of Contents

Advertisement

Pyramid AC Receiver
WARNING
• Please follow these instructions as you install the equipment and keep them for future use.
• Installation is only to be carried out by competent, qualified and experienced personnel in accordance with the
country of installation’s National Wiring Regulations. Failure to do so can result in injury or death by electric shock.
• Use a class 2 isolated power supply for the 12V DC.
• The module is susceptible to damage from Electrostatic Discharge (ESD). Take normal ESD precautions when
handling your network card. ESD prevention kits are available from most electronics distributors.
• Do not exceed the voltage and temperature limits given in the specification.
• Switch off the power before fitting a network card.
• If you have any problems, contact Baxall Limited.
CAUTION
• This is a Class A product. In a domestic environment this product may cause radio interference in which case the
user may be required to take adequate measures.
• This product is intended for use in general purpose CCTV applications in a residential, commercial or light
industrial EMC environment. Refer to Baxall Limited before using the product in medical and/or intrinsically safe
applications or in an industrial EMC environment.
• If you are using the PCB version of this product in a way other than correctly installed in the Pyramid system
weatherproof boxes, then it is your responsibility to meet EMC requirements.
• The product must be installed in accordance with good installation practice for EMC to enable the product to
function as intended and to prevent EMC problems.
• Contact Baxall Technical Support to obtain a specification defining the acceptable levels of product degradation
with regard to EMC immunity.
CAUTION
The declaration of conformance applies only to the boxed version and PCBs which are correctly installed in our
Pyramid system weatherproof box.
Page 4

ELECTROMAGNETIC COMPATIBILITY (EMC)

MANUFACTURER’S DECLARATION OF CONFORMANCE

Installation Manual

PRODUCT SAFETY

UNPACKING

BARCODING

Advertisement

Table of Contents
loading

Table of Contents