Setting Receiver Configuration With The Pyramid 2 Keyboard - Pyramid Ac receiver Installation Manual

Pyramid AC Receiver
Utility Menu
Receiver Utilities
Rx Config
No F/B
3 Wire Lens
Enter
Utility Menu
CAUTION
If the Pan/Tilt head connected to the receiver is not fitted with potentiometers, the F/B function must be disabled at
step 8. If this is not done, the pan and tilt operations will only work in one direction. If a Pan/Tilt head is fitted with
potentiometers, ensure that mechanical limit stops are set, and then press the test button on the receiver PCB. This
will ensure that the potentiometer directions are learnt correctly.
Page 16

SETTING RECEIVER CONFIGURATION WITH THE PYRAMID 2 KEYBOARD

Pyramid 2 Keyboard Operating Manual
Monitor
Receiver Configuration
3 Wire Lens
7
8
9
Operator VCR / MUX
Figure 15 - Receiver Configuration
Receiver Configuration
Camera
O
Non-Cont
F/B
10
Utility Menu
11
Installation Manual
Non-Cont
Cont
F/B