Rainfall Measurement - La Crosse Technology WS-2800 Instruction Manual

RAINFALL MEASUREMENT

The 1hour, 24 hour, week, month or total rainfall measurement is displayed on the LCD,
in the unit of mm or inch.
• Press the ▼DOWN ARROW to select the rainfall display from the following modes:
1. Total rainfall - reset manually (see "RESET THE MIN/MAX WEATHER DATA")
2. Last 1 hour rainfall – reset every four minutes, totals last 15 measurements
3. Last 24 hours rainfall - reset every day at 12:00am (midnight)
4. Last week rainfall - reset every Monday night at 12:00am (midnight)
5. Last month rainfall - reset every 1
VIEWING THE MIN/MAX WEATHER DATA
The weather station will record the maximum and minimum value of the various weather
data with time and date of recording automatically. The following stored maximum and
minimum weather data can be viewed by pressing the MIN/MAX key in normal display
mode.
1. MIN/MAX indoor temperature with the date and time of recording
2. MIN/MAX indoor humidity with the date and time of recording
3. MIN/MAX outdoor temperature with the date and time of recording
4. MIN/MAX dew point temperature with the date and time of recording
5. MIN/MAX outdoor humidity with the date and time of recording
6. MAX wind gust with the date and time of recording
7. Total rainfall with the date and time of recording
RESET THE MINIMUM AND MAXIMUM WEATHER DATA
To reset the aforementioned MIN/MAX weather data, you need to reset each of the data
independently.
1. Press MIN/MAX key to show the desired weather data.
2. Press ▲UP ARROW key. The stored value will be reset to the current value and
current time.
TOTAL RAINFALL AMOUNT
The total rainfall measurement is displayed in the unit of mm or inch. It shows the total
rainfall accumulated since last reset of the total rainfall amount.
In either Mode 1 or Mode 2 display, press the MIN/MAX key until the display shows the
total rainfall value.
To reset the rainfall reading, press the ▲UP ARROW key. The total rainfall amount will
be reset to 0, and the time updated to current time.
Note: Until the first rainfall total reset is performed, the time and date of the total
rainfall are displayed as "- - -.--.----". After the rainfall total is reset, the rainfall total
display will indicate the date and time of the last rainfall total reset.
st
of month at 12:00am (midnight)
61