Default Weather Alarm Values; Pressure Alarms - La Crosse Technology WS-2800 Instruction Manual

DEFAULT WEATHER ALARM VALUES

Pressure
Temperature (In or
Out)
Relative Humidity
(In or Out)

PRESSURE ALARMS

1. In the normal display mode, press the ALARM key once. The high pressure
alarm display will be shown.
2. Press and hold the SET key for about 2 seconds. The pressure digit will start
flashing.
3. Press the ▲UP ARROW key or ▼DOWN ARROW key to set the high pressure
alarm value. Hold the arrow key in to change the value faster.
4. Press the ALARM key to confirm the setting. The digit will stop flashing.
5. Press the SET key to switch the alarm on or off. The ((( ))) icon indicates the
alarm is switched on.
6. Press the ALARM key once. The Low Pressure alarm display will be shown.
7. Press and hold the SET key for about 2 seconds. The pressure digit will start
flashing.
8. Press the ▲UP ARROW key or ▼DOWN ARROW key to set the low pressure
alarm value. Hold the arrow key in to change the value faster.
9. Press the ALARM key to confirm the setting. The digit will stop flashing.
10. Press the SET key to switch the alarm on or off. The ((( ))) icon indicates the
alarm is switched on.
11. Press the ALARM key to move to the indoor temperature alarm settings.
Low 960 hPa
High 1040 hPa
Low
0°C
High 40°C
Low 45%
High 70%
53
Wind gust
Rainfall in 24 hours
High 100 km/h
High 50 mm