Epson Stylus Color 660 Service Manual page 25

EPSON Stylus Color 660
5.2.1.4 Head Cleaning
Stylus Color 660 have no dummy cleaning sequence called CL3, which
was performed to prevent ink from being unnecessarily consumed when
cleaning was repeated without any printout. However, Stylus Color 660
is alternatively equipped with the strongest cleaning sequence CL2
contained in this adjustment program. With this sequence, you can
forcibly solve the clogged nozzle problem caused by viscous ink.
If you can not recover the clogged nozzles despite you
performed CL2 operation, enter the Initial ink charge
sequence by referring to Section 5.2.1.3.
1. On Stylus COLOR 660 SERVICE PROGRAM, select Maintenance
menu.
Figure 5-10. Maintenance Menu
Chapter 5 Adjustment
2. From Maintenance menu, select "Head cleaning". The following
screen appears.
Figure 5-11. Head Cleaning
3. Click OK. The printer enters the CL2 sequence.
for the process to complete.)
Revision A
(It takes 60 seconds
24