Epson Stylus Color 660 Service Manual page 175

EPSON Stylus Color 440/640/740
5. After a few seconds, the model name appears on the screen shown
below. Proceed to one of the following steps.
If the printer is Stylus Color 440 or 640, go to
If the printer is Stylus Color 740, go to
Step 1.
Figure 5-7. Initial Screen (2)
C A U T I O N
If the screen above does not appear, it means no model
name is registered, and you must proceed to
5.2.2.2.1 / Step 1 as the screen automatically advances
to the Mode Name Null Condition screen (Figure 5-9).
Chapter 5 Adjustment
6. The main menu shown below appears.
Step 6.
Section 5.2.2.2.2 /
Section
Figure 5-8. Main Menu of the Program
Revision A
137