Table of Contents
Advertisement
March 1997
Installation Of The Central Control Unit (CCU)
Note
1
Do not use the telephone system components near sources of electric 'noise' or interference. Examples
are: fluorescent lamps, air conditioners, televisions, fridges, washing machines, and radios.
2
The equipment should not be exposed to heat sources, direct sunlight, extreme temperature, moisture or
damp, strong vibrations, greasy or dusty environments.
Operating temperature 0
Operating humidity
Do not install the equipment in damp or humid environments such as bathrooms and swimming pools.
3
Never attempt to insert wires, pins or similar objects in the vents or openings of the equipment.
4
Never clean the equipment with benzene, paint thinner or other solvent materials. Wipe with a soft cloth to
clean.
5
Do not change the installation location without consulting your dealer/maintainer.
6
Installation of the equipment near welding machines or broadcast antennae may cause interference.
Removing The Covers
1
Remove the 8 screws securing the front and side covers.
2
Remove the front cover by lifting it forward and up from the CCU.
3
Remove the side panels by sliding the upwards and lifting them away from the side of the CCU
Panasonic Digital Business System - Installation Manual
º
-
º
C
40
C
0% - 60%
Figure 1 - Cover Securing Screw Locations
6
Issue 5
Hide quick links:
Advertisement
Table of Contents
