Introduction; March 1997 Issue - Panasonic Digital Business System Installation Manual

Panasonic Digital Business System - Installation Manual
March 1997 Issue 5

Introduction

This section describes the installation and connection of the Digital Business System and its components.
Read the following section before beginning installation work.
Important
This apparatus must be installed in accordance with BS6701 and general approval NS/G/23/L/100005. This is a
condition of the approval. Any installation which does not comply with this condition will invalidate the approval of
that particular installation.
This equipment requires a maintenance contract issued by a maintainer holding BSI approval. This is a statutory
requirement.
This is a class A product.
In a domestic environment this product may cause radio interference, in which case the user may be required to
take appropriate measures.
This product has been CE marked to show compliance with the EMC Directive 89/336/EEC amended by
92./31/EEC and 93/68/EEC.
5