Wall Mounting The Vau - Panasonic Digital Business System Installation Manual

March 1997

Wall Mounting The VAU

1. Remove the two screws, (A) and (B), from top cover of the VAU.
2. Leaving the top cover aside, cut into the grooves at (C) and (D). Use pliers to bend the section, between (C)
and (D), back and forth several times to remove it.
3. Remove the small plate between (C) and (D) and put the wire
here. Then replace the plate as before.
4. Place one of the three provided screws in the wall at (E), leaving a 8 mm space between the wall and the screw.
5. Hang the unit on the wall and tighten the screw.
6. Using the remaining two screws, attach the unit to the wall at areas marked (F) and (G).
7. Replace top cover.
Panasonic Digital Business System - Installation Manual
Figure 30 - Wall Mounting The VAU
53
Issue 5