Hdmi And Dvi Input - Haier HL32LE2 Service Manual

Service Manual
Model No.: HL42XLE2
C
Then, make the corresponding audio connection
by connecting an audio cable from your PC's audio
out or headphone jack to the TV's PC/DVI audio in
jack. If using a sound card, adjust the VGA sound as
required.
PC PC/DVI AUDIO
PC IN
How to use
A
Turn on the computer and the TV.
B
Use INPUT on the remote control to select VGA or
HDMI source.
C
Check the image on your TV. There may be noise
associated with the resolution, vertical pattern,
contrast or brightness in VGA mode. If noise
is present, change the VGA mode to another
resolution, change the refresh rate to another rate
or adjust the brightness and contrast on the menu
until the picture is clear. If the refresh rate of the VGA
graphic card can not be changed, change the VGA
graphic card or consult the manufacturer of the VGA
graphic card.
Note
Use a DVI cable.
R
Avoid keeping a fixed image on the TV's screen
R
for a long period of time. The fixed image may
become permanently imprinted on the screen.
The synchronization input form for Horizontal and
R
Vertical frequencies is separate.
Resolution
Y
22
Back of TV
Mode Resolution
VGA 640×480
SVGA 800×600
XGA 1024×768

HDMI and DVI input

When the source device (DVD player , Bluray player,
or Set Top Box) supports HDMI
How To Connect
A
Connect the source device to the HDMI port of
this TV with an HDMI cable (not supplied with this
product).
B
No separated audio connection is necessary.
How To Use
• If the source device supports Auto HDMI function,
the output resolution of the source device
will be automatically set to the appropriate
resolution1280×720p.
• If the source device does not support Auto HDMI,
you need to set the output resolution appropriately.
To get the best picture quality, adjust the output
resolution of the source device , if available, to
1280×720p for the 32" TV and 1920 x 1080 for the
37" and 42" TVs.
• Press the INPUT button to select the corresponding
HDMI input source.Select HDMI input source in
input source option of Select Main source menu.
When the source device (DVD player , Bluray player,
or Set Top Box) supports DVI
How To Connect
A
Connect the source device to the HDMI port of the
TV with a HDMI-to-DVI cable (not supplied with this
product).
Installation
Frame
frequency
(Hz)
60Hz
60Hz
75Hz
60Hz
75Hz
Haier LED HDTV EN-10