Getting Started - Electrolux ELM 5000 User Manual

Getting started

1. Place the machine on a flat surface
and fill the tank with cold, drinkable
and non sparkling water. (The machine
must not be used with empty tank!)
Plug the power cord into the mains
and press the ON button.
The machine is ready to use when
the cup indicator light (B) stops
flashing and becomes steady.
down or pushing it up.
9 min Auto-off
2. When starting the machine for the
first time: Place a bowl (0.5 L capacity
minimum) under the coffee spout (F),
press the Espresso button (B) once
and run ½ container then press the
Espresso button again to stop.
for 2. A MODO MIO capsules. Only suitable
Lavazza A MODO MIO capsules
should be placed in the capsule
compartment. Single dose capsule
brews a single coffee.
DO NOT use the capsules more than
once. Inserting 2 or more capsules can
cause the machine to malfunction.
4. The machine is equipped with an
energy saving function that
automatically switches off after 9 min
of inactivity.
3. The machine must not be used with
empty tank! If you use it without water
for a too long time the auto priming
could be blocked. To prime the machine
again, place a bowl (0.5 L capacity
minimum) under the coffee spout (F),
press the Espresso button (B) once and
run ½ container then press the Espresso
button again to stop.
3. Place a cup on the drip tray grid (G) and
adjust the coffee spout height. Lift the lever,
insert a capsule in the compartment. Close
the lever and press the Espresso button (B).
When the desired amount of coffee is reached,
press the Espresso button again to stop.
When the coffee is ready, lift the lever and the
capsule falls down into the used capsules
container (J).
!
3