Cambridge Audio iD100 User Manual page 9

5. USB connection
Used to sync your Apple device with iTunes
USB port to your PC using a high quality USB cable (Type B
to Type A).
6. +12V DC In terminal
Connect the iD100 to the supplied AC adaptor only.
7. Video output
To view video content connect the iD100 Video Out (Jack
Socket, 4-Pole) to a TV/monitor using the supplied cable.
See below for the right Video Format Selection switch
setting.
Note: Also make sure the right source input is selected on
the TV/Monitor.
Composite – Connect the iD100 to a TV/monitor with the
supplied cable using the single Yellow/Blue RCA/PHONO
connector.
Component – Component (Y, Pb, Pr) is a superior quality
alternative. Connect the iD100 to a TV/monitor with the
supplied component cable using all three RCA connectors.
Make sure the colour coded RCA's are plugged into the
matching connectors (RED/GREEN/BLUE)
TV/Monitor.
S-Video – S-Video can also be used but you will need to
obtain a suitable mini-jack to S-Video such as those used
by camcorders. Contact your dealer for details.
Video select switch
. Connect the Set the toggle switch to select the correct video format
TM
output.
Switch position
Top
Middle
Bottom
Jack
on the
iD100
Label Cable connection
CVBS Composite
S-Video Own cable must be used
YPbPr Component
Component (Pr)
Red
Component (Y)
Green
Component (Pb) or
Composite (CVBS)
Blue/Yellow
9