Advertisement
Quick Links
Advertisement
Related Manuals for CPS CC240RF COMPUTE-A-CHARGE
Summary of Contents for CPS CC240RF COMPUTE-A-CHARGE
- Page 1 CC240RF COMPUTE-A-CHARGE ® WIRELESS CHARGING SCALE OPERATION MANUAL...
- Page 2 GENERAL INFORMATION Table of Contents General Information Charge Mode Operation Recovery Mode Key Funtions Additional Features Display Screens Troubleshooting Warranty Weigh Mode The CC240RF is an advanced, battery operated, WIRELESS weighing and charging scale. It has been designed to be accurate, rugged and reliable over a large weighing span (240 lbs / 110 kg). It incorporates a wireless display and control unit with 3 keys and an extra large LCD display for easy viewing.
- Page 3 ON or OFF. Press once to turn power ON, if the display and control unit is OFF. To turn OFF press and hold until a beep is heard and CPS OFF appears on the screen (See Fig. 11). This turns off both the scale platform and the display and control unit and also clears all memory and settings.
- Page 4 OPERATION Figure - 1: Displays the software version of the unit. Figure - 2: Automatic Power Off enabled. Press [TARE] key to change. (See page 8 for details) Figure - 3: Shows the display and control unit battery Figure - 4: Count down to connect with the scale plat- voltage.
- Page 5 OPERATION Figure - 7: Scale platform battery voltage. Figure - 8: Notifies the user that a zero calibration is being performed. Figure - 9: Notifies the user that a full scale calibration Figure - 10: Instrument is ready to be used. is being performed.
- Page 6 OPERATION Charge Mode 1. Place the weighing platform on a level, rigid surface. Figure - A 2. Press POWER [ ] key to turn the unit ON any weight on platform will be set to zero. (See figures 1-10 for the screen squence while CC240RF turns on).
- Page 7 OPERATION Danger - the recovery cylinder used contains liquid refrigerant. Overfilling of the recovery tank may cause a violent explosion resulting in severe injury or even death. 6. Turn on the refrigerant recovery unit. Follow the recovery unit’s instructions. 7. If the recovery process finishes before the weight reaches the maximum tank fill weight, close the cylinder valve and all other valves that are in the recovery pathway.
- Page 8 Install Batteries: When the control and display unit is turned on, it will display the voltage of its battery (See Fig. 3). CPS recommends replacing the battery in the control and display unit with a fresh 9 V alkaline battery when the...
- Page 9 (See Fig. 7). CPS recommends changing the scale platform batteries when the reading is 4.5 volts, although useful battery operation will result all the way down to 4.2 VDC; always use a set of 4 AA alkaline cells.
- Page 10 This repair policy does not include equipment that is determined to be beyond economical repair. Contact Us Web : www.cpsproducts.com Email: info@cpsproducts.com CPS Products, Inc. CPS PRODUCTS, Inc. (HEADQUARTERS) 1010 East 31st Street, Hialeah, Florida 33013, USA Tel: 305-687-4121, 1-800-277-3808, Fax: 305-687-3743 E-mail: info@cpsproducts.com www.cpsproducts.com CPS CANADA 4605 Crysler Ave.
- Page 11 NOTES...
- Page 12 www.cpsproducts.com #73-222...