Mercedes-Benz CLK 320 Operator's Manual page 77

Instruments
Operation
and controls
Restraint systems
• No modifications of any kind may be made to
any components or wiring of the "SRS". This
includes changing or removing any component
or part of the "SRS", the installation of
additional trim material, badges etc. over the
steering wheel hub, front passenger airbag
cover, or front door trim panels, and
installation of additional electrical/electronic
equipment on or near "SRS" components and
wiring. Keep area between airbags and
occupants free of objects (e.g. packages,
purses, umbrellas, etc.).
• An airbag system component within the
steering wheel gets hot after the airbag has
inflated. Do not touch.
• Improper work on the system, including
incorrect installation and removal, can lead to
possible injury through an unintended
activation of the "SRS".
Instrument
Driving
cluster display
Practical hints Car care
74
• In addition, through improper work there is
the risk of rendering the "SRS" inoperative.
Work on the "SRS" must therefore only be
performed by an authorized Mercedes-Benz
Center.
• For your protection and the protection of
others, when scrapping the airbag unit or
emergency tensioning retractor, our safety
instructions must be followed. These
instructions are available at your authorized
Mercedes-Benz Center.
• Given the considerable deployment speed and
the textile structure of the airbags, there is the
possibility of abrasions or other injuries
resulting from airbag deployment.
When you sell the vehicle we strongly urge you to give
notice to the subsequent owner that it is equipped with
an "SRS" by alerting him to the applicable section in the
Operator's Manual.
Technical
Index
data