Mercedes-Benz CLK 320 Operator's Manual page 123

Instruments
Operation
and controls
Combination switch
6 Control for windshield wiper/washer system:
Push briefly for single wipe without adding washer
fluid (use only when windshield is wet).
Push past detent and hold to activate wiper and
washer.
Notes:
The windshield washer reservoir, hoses and nozzles are
automatically heated.
See page 256 for refilling windshield washer/headlamp
cleaning system.
Instrument
Driving
cluster display
7
6
P54.25-2033-26
Practical hints Car care
120
7 Windshield wiper
0 Wiper off
I Intermittent wiping
(vehicles with optional rain sensor: One initial
wipe, pauses between wipes are automatically
controlled by a rain sensor monitoring the
wetness of the windshield.)
Notes:
With switch in this position, one wipe occurs
when turning the electronic key in steering lock
from position 0. However, this might cause
scratches on a dry windshield. Turn combination
switch to Off position before turning the
electronic key in steering lock from position 0.
Vehicles with optional rain sensor:
Do not leave in intermittent setting when vehicle
is taken to an automatic car wash or during
windshield cleaning. Wiper will operate in
presence of water spray at windshield, and wiper
may be damaged as a result.
II Normal wiper speed
III Fast wiper speed
Technical
Index
data