Panasonic UF-8300 Service Manual page 2

1. Panasonic Communications Company of North America, and other Panasonic Sales
Companies reserve the right to change any information enclosed herein without prior
notification. (This includes, but is not limited to, parts pricing, availability, and text)
2. Electrical parts supplied may include previously used components.
3.
Important Safety Notice
Components identified by a
When replacing any of these components, use only manufacturer's specified parts.
4. In New Parts column, "N" indicates part is used only in
indicates part is used in previous models.
5. In Remarks column, "PM" indicates "Preventive Maintenance Part".
6. In Remarks column, "RTL" indicates that the Retention Time is limited for this item. After
the discontinuation of this assembly in production, the item will continue to be available for
a specific period of time. The retention period of availability is dependent on the type of
assembly, and in accordance with the laws governing part and product retention.
After the end of this period, the assembly will no longer be available.
7. This "Unit" which includes other itemized parts is provided as "Limited Availability" for your
convenience, and will only be offered for up to 3 years after the production of the unit
ceases. However, the individual contents of the assembly will be available for the standard
period.
8. This Product Uses Lead (Pb) Free Solder Printed Circuit Boards (PCBs).
Information regarding Lead-Free (PbF) solder;
Distinction of PbF PCB:
PCBs (manufactured) using lead free solder will have a
part numbers in a label on the PCB.
Caution:
Pb free solder has a higher melting point than standard solder; typically the melting
point is 50 - 70 F (30 - 40
control and adjust it to 700
temperature soldering irons, do not heat the PCB for too long to prevent solder
splash or damage to the PCB.
Pb free solder will tend to splash when heated too high (about 1112 F/600
ECO SOLDER M705 (available from Senju Metal Industry Co., Ltd.;
URL: http://www.senju-m.co.jp) is recommended when repairing PbF PCBs.
General Annotations
mark, have special characteristics important for safety.
) higher. Please use a soldering iron with temperature
20 F (370
2
Series, "C"
UF-8300/8200
mark following the PCB
10 ). Exercise care while using higher
).