Sound; Mts; Digital Audio (Ml); Surround - JVC LCT2443-001A-A User Manual

Sound

Picture Display
OK
:Select :Operate

MTS

Allows you to listen to a program in stereo, mono sound or another language (SAP).
(Depending if available in the program). First you must set the MODE to TV on your remote.
Notes:
• When you are receiving a digital broadcast, if there are other languages, you can change the
language by pressing the ML/MTS button.
• Keep the TV in stereo mode to get the best sound quality. The sound will work in stereo
mode even if a certain broadcast is in mono sound only.
• Choose the mono setting to reduce excessive noise on a certain channel or broadcast.
• MTS unavailable if your television's input source is (V1, V2, V3, V4, V5).
• ML/MTS will not work when you are using the HDMI.

Digital Audio (ML)

You can change the language if there are other languages available. (Digital channels only)

Surround

You can select the surround mode you like. Movie / Music / News / Mono / Off

Sound Status

You can choose several types of sound modes. Speech / Jazz / Classic / Rock / User
Note:
• If you select User, you can customize the various sound frequencies.

Audio Reset

Resets all sound adjustments at once to the default settings.
TV Sound
MTS Mono
Digital Audio(ML) None
Surround OFF
Sound Status Rock
100Hz 8
-10 – – 10
330Hz 4
-10 – – 10
1KHz -10 – 5 – 10
3.3KHz -10 – 5 – 10
10KHz -10 – 5 – 10
Audio Reset
BACK MENU
:Back :Exit
Customizing your TV
Power Setting
Note:
• When using headphones, some
Sound Menus cannot be used
(such as Surround or Sound
Status)
39