Remote Control - JVC LCT2443-001A-A User Manual

The following pages gives you a brief description of each button's function. For more detailed
information on the remote control buttons, see pages 20 - 22. This remote can also control up
to four other devices. See page 49 - 55.
POWER
TV STB VCR DVD AUDIO
MODE
INPUT
V1 V2 V3 V4
For V4 (Video-4) and V5 (Video-5) you must select the signal
input type fi rst (ie. composite, S-Video, or component). To do
so, you need to press the V4 or V5 button until the correct
type is highlighted. Select "Composite 1" for composite video
signal input, "S-Video" for S-video signal input, or "Component
1" for component video signal input. Select "Composite 2" for
composite video signal input or "Component 2" for component
video signal input.
1 2
4 5
7 8
RETURN +
0
TUNE
Lets you decide the input channel and select
it. After pressing the remote 0 - 9 buttons,
TUNE
RETURN + Lets you go back to the previously selected
TV
Move sequentially through the channels.
– CH +
– VOL +
All remote control buttons are illuminated,
LIGHT
Turns the TV volume to 0. Press again to
MUTING
Turns the TV on or off.
Switch between "TV / STB /
VCR / DVD / AUDIO devices.
Switch between devices
connected to Video-1, 2, 3,
V5
3
Change channels. Input
6
remote codes. See page 49.
9
TV
press TUNE.
channel. See page 20.
Raise or lower the volume.
except for the LIGHT button.
restore the volume.

Remote Control

See page 49.
4 and 5.
POWER
TV STB VCR DVD AUDIO
MODE
INPUT
V1 V2 V3 V4
1 2 3
4 5 6
7 8 9
RETURN +
0
TV
TUNE
– CH + – VOL +
LIGHT MUTING
OK OK
DVR DVR
STATUS STATUS
SOUND SOUND VIDEO VIDEO GUIDE GUIDE
SUB CH SUB CH C.C. C.C. DISPLAY DISPLAY
TV/VCR TV/VCR SUB T. SUB T.
SLEEP SLEEP ML/MTS ML/MTS
RM-C1420 RM-C1420
TV TV
V5
11