Table of Contents
Advertisement
Wireless N 150 USB Adapter
The following are some general wireless tips to help minimize the impact of interference within an environment.
Assign your network a unique SSID. Do not use anything that would be identifying like "Smith Family Network". Choose something
that you would easily identify when searching for available wireless networks.
Do not turn off the SSID broadcast. The SSID broadcast is intended to be on and turning it off can cause connectivity issues. The
preferred method of securing a wireless network is to choose a strong form of encryption with a strong and varied encryption key.
Note: after setting up the SSID, encryption type and encryption key/passphrase, please make a note of them for future reference.
You will need this information to connect your wireless computers to the wireless router/access point.
Change the channel. Most wireless access points and routers are defaulted to channel 6. If you have a site survey tool that will
display the channels you can plan your channel selection around neighboring access points to minimize interference from them. If
your site survey tool does not display the channel try using channels 1 or 11.
If using 802.11n you should be securing the network with WPA2 security.
Note: Due to Wi-Fi certification considerations if you choose WEP, WPA or WPA2-TKIP encryption this device may operate in
legacy wireless mode (802.11b/g). You may not get 802.11n performance as these forms of encryption are not supported by the
802.11n specification.
Please also make sure that the wireless hardware is not placed in any type of shelving or enclosures.
Avoid stacking hardware on top of each other to prevent overheating issues. Maintain enough free space around the hardware for
good ventilation and airflow. There should also be plenty of free space around the antennas to allow the wireless signal to propagate.
There are a number of other environmental factors that can impact the range of wireless devices.
1. Adjust your wireless devices so that the signal is traveling in a straight path, rather than at an angle. The more material the
signal has to pass through the more signal you will lose.
2. Keep the number of obstructions to a minimum. Each obstruction can reduce the range of a wireless device. Position the
wireless devices in a manner that will minimize the amount of obstructions between them.
Wireless Tips
3
Product Overview
Advertisement
Table of Contents
