Table of Contents
Advertisement
Wireless N 150 USB Adapter
The Open \ WEP Basic and Advanced Security options can be configured to use 802.1x. To use 802.1x with these security options,
check the Enable 802.1x box and configure the parameters that appear in the 802.1x Settings section as described below:
Enable 802.1x: Check this box to enable 802.1x.
EAP Type: Use the drop-down menu to select the EAP
Type being used by your network.
If selecting the EAP_TLS option, select the
User Certificate that is being used from the
User Certificate drop-down menu.
If selecting the EAP_PEAP option, select the
PEAP Inner value that is being used from the
PEAP Inner drop-down menu.
If selecting the EAP_TTLS option, select the
TTLS Inner value that is being used from the
TTLS Inner drop-down menu.
User Name: Enter the user name that is being used for 802.1x in this field.
Password: Enter the password for the 802.1x user name in this field. Check the Display Password box to display the
password in clear text. To display the passwords as a series of ****, uncheck the Display Password box.
Server Settings: Click this button to configure the Trusted Root Certification Authorities List. See the following page for more
information.
OK Button: Click this button when you have finished configuring the advanced wireless profile.
Cancel Button: Click this button to cancel any changes made.
Enabling and Configuring 802.1x Parameter for a Wireless Profile
37
Adapter Configuration
Advertisement
Table of Contents
