Table of Contents
Advertisement
Wireless N 150 USB Adapter
Carry out the following steps to connect to your network using the WPS PIN Code method
1. Select PIN (Personal Identification Number) and click Next.
2. Make sure your access point or wireless router is close by. Write down the number on the screen. Enter this number in your
access point or wireless router. Please refer to the manufacture's manual for instructions. Once you click Next, you will have 2
minutes to enter this number in your access point or wireless router.
3. The adapter will try to establish connectivity to your access point or wireless router.
4. When this screen appears, you have successfully established connectivity. Click Finish to complete your setup.
WPS PIN Code
42
Adapter Configuration
Advertisement
Table of Contents
