Body Reassembly - Polaroid 636 Repair Manual

15. Remove the Pack Spring by depressing it with your thumb and pulling it forward,
out of the Body (Fig. 15). (If the Camera has a Tripod Nut, it will now fall out.)
16. To Remove the Eyecup/Retainer (one unit), from inside the Body depress either pair
of the four tabs shown in Fig. 16 and remove the Eyecup/Retainer.

Body Reassembly

Replace parts removed in Steps 14 - 16. (Pack Spring holds Tripod Nut in place.)
Fig. 15 Removing Pack Spring and if present, Tripod Nut
Fig. 16 Removing the Eye Cup/Retainer
48
Eye Cup Retainer