The contents of this document are provided in connection with Avenview Inc. ("Avenview") products. Avenview makes no representations or warranties with
respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any
time without notice. No license, whether express, implied, or otherwise, to any intellectual property rights is granted by this publication. Except as set forth in
Avenview Standard Terms and Conditions of Sale, Avenview assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products
including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right.
Reproduction of this manual, or parts thereof, in any form, without the express written permission of Avenview Inc. is strictly prohibited.
2x4 hdmi 1.3 extender / splitter over single cat5 (14 pages)
Summary of Contents for Avenview C5-USB-200
Page 1
No license, whether express, implied, or otherwise, to any intellectual property rights is granted by this publication. Except as set forth in Avenview Standard Terms and Conditions of Sale, Avenview assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right.
However, like all electronic equipment’s, the C5-USB-200 should be used with care. Read the following safety instructions to protect yourself from possible injury and to minimize the risk of damage to the unit.
Introduction The Avenview C5-USB-200, USB Extender over CAT5/CAT6 is an extender between USB device and host computer with embedded connector integrated circuits on both sides of the extender. The USB extender with the chip inside is not a passive extender. It is an active device. The USB signals going in and out of this extender in both directions are buffered to assure signal quality.
Use the DC power adapter with correct specifications. If inappropriate power supply is used then it may cause a fire. Do not twist or pull by force ends of the optical cable. It can cause malfunction. www.avenview.com...
Installation (C5-USB-200) To setup Avenview C5-USB-200 follow these steps for connecting to a device: Connect C5-USB-200 Transmitter unit to PC Connect Rj45 cable to C5-USB-200 Transmitter and Receiver Connect USB Device at remote location to C5-USB-200 Receiver. Section 2: Specifications...
Page 7
Disclaimer While every precaution has been taken in the preparation of this document, Avenview Inc. assumes no liability with respect to the operation or use of Avenview hardware, software or other products and documentation described herein, for any act or omission of...
Need help?
Do you have a question about the C5-USB-200 and is the answer not in the manual?
Questions and answers