Introduction - Scott Masterdock Instruction Manual

Masterdock Docking Station
Instruction Manual

2. Introduction

The Masterdock is an automated bump testing and calibration station designed exclusively for
performing bump tests and calibration of Scott's Protégé portable gas monitors. The Masterdock
allows users to quickly and effectively verify the proper operation of the Protégé with the touch of a
button. Removable memory in the Masterdock logs all calibrations and testing for accurate record
keeping. The Masterdock can be powered using the included AC adapter or by installing four
alkaline C-cell batteries.
The Masterdock eliminates the need to connect a calibration adapter and a remote calibration
cylinder to the Protégé. A calibration cylinder is installed into the docking station allowing for multiple
bump tests and calibrations of Protégé units simply by docking a Protégé into the Masterdock and
pressing a button.
The Masterdock can be used on any flat surface such as a desk top, or can be mounted on a wall.
Wall-mounting instructions are included in this guide.
Refer to Figure 2-1.
7 of 20
P/N 087-0045 Rev. E 01/10