General Warnings And Cautions; General Rules For Use Of The Masterdock - Scott Masterdock Instruction Manual

1.2.1. General Warnings and Cautions

The following list of warnings and cautions pertain to the general use and care of the Masterdock.
Failure to follow these warnings and cautions may result in death, injury, or poor equipment
performance.
U M
SE THE ASTERDOCK ONLY IN AN ATMOSPHERE THAT HAS BEEN VERIFIED TO BE FREE OF TOXIC OR
COMBUSTIBLE GASES OR VAPORS
T M
HE ASTERDOCK IS NOT FOR USE WITH ANY OTHER PRODUCT THAN THE
V
ERIFY THE GAS INLET PORT HAS A CLEAN FILTER ATTCHED AND AN UNOBSTRUCTED FLOW PATH PRIOR TO USE
D
O NOT USE A MAGNET NEAR THE
D
O NOT USE ANY SOLVENTS
M
ASTERDOCK AS THESE CAN CAUSE DAMAGE TO THE SENSORS OF THE

1.2.2. General Rules for Use of the Masterdock

It is critical that this docking station be used and maintained properly. Failure to do so could
jeopardize the people whose lives depend on its operation and cause injury or death.
• USE THE DOCKING STATION CORRECTLY. Only use the Masterdock to bump test and
calibrate Scott's Protégé portable gas monitor.
• POWER MUST BE ON TO WORK. The Masterdock will only function while powered on.
• VERIFY CALIBRATION CYLINDERS ARE SUFFICIENTLY CHARGED. Calibration
cylinders must have at least 50 psi of pressure to accurately calibrate or bump test Protégé
units.
• DO NOT USE CALIBRATION GAS BEYOND THE EXPIRATION DATE. Verify Calibration
gas has not exceeded its expiration date prior to use.
• DO NOT USE IN UNKNOWN OR POTENTIALLY HAZARDOUS ATMOSPHERES. Always
verify an atmosphere is free of toxic or combustible gases prior to powering up the
Masterdock. Keep the air filter clean to prevent contaminants from entering the units air
system.
WARNINGS
.
CAUTIONS
SD
MEMORY CARD TO PREVENT LOSING OR CORRUPTING DATA
, ,
CHEMICALS OR POLISHES CONTAINING SILICON COMPOUNDS TO CLEAN THE
3 of 20
Masterdock Docking Station
Instruction Manual
P
ROTÉGÉ PORTABLE GAS MOINITOR
P .
ROTÉGÉ
P/N 087-0045 Rev. E 01/10
.
.
.